Sharpening Stone Diamond Cutting Disc For Slotting Oxidation Film Copper

Slotting Wheels Diamond Cutting Disc for cutting or slotting of oxidation film

This page is specifically focused on our slotting wheels. The slotting wheel also commonly referred to as a cutting wheel is made from diamond abrasives and metal bonds using a sintering process. It is primarily used for cutting or slotting of oxidation film with a high content of A12O3 or a metal oxide film resistance. During the slotting process, the diamond cutting disc requires no enforced cooling conditions, providing a high precision, a narrow slot and a long service life.

The utility model relates to a resistance groove grinding wheel which is formed by sintering metal bonding agent and diamond abrasive,and is used for cutting the resistance of the oxide film or metal oxide film of the ceramic content above 70%.When the groove is cut,it does not need the forced cooling condition,which has the characteristics of high precision,narrow groove and long service life.

When the utility model is used,the insulation of grinding wheel and the spindle of the grooving machine is realized by an insulating splint and an insulating ring,The outer diameter of the insulation ring is matched with the inner diameter of the grinding wheel.First use the diamond file or stone grinding wheel new use,to ensure that the burr griding wheel cylindrical concentric and cut off the edge of the wheel.Groove,the direction of resistance rotation and the direction of rotation of the grinding wheel at the same time slot better.

Direction for Use

1. Insulation:

During use, please use a cleat insulator and insulation gasket to keep the abrasive disc insulated from the spindle of the grooving machine. To be more specific, the outer diameter of the insulation gasket is matched with the inner diameter of the slotting wheel; and the inner diameter of the insulation gasket is matched with the machine spindle.

2. Dressing:

Use a diamond file or sharpening stone to dress the new slotting wheel before use, to ensure that the external circle can be concentric and burr free.

3. Rotary Direction:

If the rotary direction of resistance is opposite to that of the slotting wheel, the slotting effect will be better.